User Manual

The recording will be triggered.
Note
The device should support recording.
Card Reader Buzzer
The audible warning of card reader will be triggered.
Alarm Output
The alarm output will be triggered for nocaon.
Zone
Arm or disarm the zone.
Note
The device should support zone funcon.
Access Control Point
The door status of open, close, remain open, and remain close will be triggered.
Note
The door status of open, close, remain open, and remain close cannot be triggered at the
same me.
Audio Play
The audio prompt will be triggered. And the select audio index related audio content will be
played according to the
congured play mode.
8. Click Save.
When the card (congured in Step 5) swipes on the card reader (congured in Step 6), it can
trigger the linked
acons (congured in step 7).
9. Oponal: Aer adding the device linkage, you can do one or more of the following:
Delete Linkage
Sengs
Select the congured linkage sengs in the device list and click Delete
to delete it.
Edit Linkage
Sengs
Select the congured linkage sengs in the device list and you can edit
its event source parameters, including event source and linkage target.
Congure Employee ID Linkage
When person enter the employee ID on the specied card reader, it can trigger linkage acons of
other devices, such as alarm output, opening door, etc.
Before You Start
Add person. For details, see Manage Person Informaon.
Access Controller User Manual
94