User Manual

ManualsBrandsHikvision ManualsAccess Control ProductsUltra Series Wall-Mounted Face Access Terminal

100

Table Of Contents

Legal Information
Symbol Conventions
Regulatory Information
Safety Instruction
Available Models
Chapter 1 Overview
- 1.1 Overview
- 1.2 Features
Chapter 2 Appearance
Chapter 3 Installation
- 3.1 Installation Environment
- 3.2 Flush Mounting with Gang Box
- 3.3 Surface Mounting
Chapter 4 Wiring
- 4.1 Terminal Description
- 4.2 Wire Normal Device
- 4.3 Wire Secure Door Control Unit
- 4.4 Wire Fire Module
  - 4.4.1 Wiring Diagram of Door Open When Powering Off
  - 4.4.2 Wiring Diagram of Door Locked When Powering Off
Chapter 5 Activation
- 5.1 Activate via Device
- 5.2 Activate via Web Browser
- 5.3 Activate via SADP
- 5.4 Activate Device via Client Software
Chapter 6 Quick Operation
- 6.1 Select Language
- 6.2 Set Application Mode
- 6.3 Set Network Parameters
- 6.4 Link to Mobile Client
- 6.5 Set Administrator
Chapter 7 Basic Operation
- 7.1 Login
  - 7.1.1 Login by Administrator
  - 7.1.2 Login by Activation Password
- 7.2 Communication Settings
- 7.3 User Management
- 7.4 Data Management
- 7.5 Identity Authentication
  - 7.5.1 Authenticate via Single Credential
  - 7.5.2 Authenticate via Multiple Credential
- 7.6 Basic Settings
- 7.7 Set Biometric Parameters
- 7.8 Set Access Control Parameters
- 7.9 Time and Attendance Status Settings
- 7.10 System Maintenance
- 7.11 Video Intercom
Chapter 8 Operation via Web Browser
- 8.1 Login
- 8.2 Live View
- 8.3 Person Management
- 8.4 Search Event
- 8.5 Configuration
Chapter 9 Client Software Configuration
- 9.1 Configuration Flow of Client Software
- 9.2 Device Management
  - 9.2.1 Add Device
  - 9.2.2 Reset Device Password
- 9.3 Group Management
- 9.4 Person Management
- 9.5 Configure Schedule and Template
  - 9.5.1 Add Holiday
  - 9.5.2 Add Template
- 9.6 Set Access Group to Assign Access Authorization to Persons
- 9.7 Configure Advanced Functions
- 9.8 Configure Linkage Actions for Access Control
- 9.9 Door Control
  - 9.9.1 Control Door Status
  - 9.9.2 Check Real-Time Access Records
- 9.10 Event Center
- 9.11 Time and Attendance
Appendix A. Tips for Scanning Fingerprint
Appendix B. Tips When Collecting/Comparing Face Picture
Appendix C. Tips for Installation Environment
Appendix D. Dimension
Appendix E. Function Differences
Appendix F. Communication Matrix and Device Command

9.2.1 Add Device

The client provides three device adding modes including by IP/domain, IP segment, and ISUP

protocol. The client also supports

imporng mulple devices in a batch when there are large

amount of devices to be added.

Add Online Device

The acve online devices in the same local subnet with the client soware will be displayed on the

Online Device area. You can click Refresh Every 60s to refresh the informaon of the online

devices.

Add a Detected Online Device

You can select a detected online device displayed in the online device list and add it to the client.

Steps

1. Enter the Device Management module.

2. Click Device tab on the top of the right panel.

3. Click Online Device to show the online device area.

The searched online devices are displayed in the list.

4. Select an online device in the Online Device area, and click Add to open the device adding

window.

Note

For the inacve device, you need to create the password for it before you can add the device

properly. For detailed steps, refer to .

5. Enter the required informaon.

Name

Enter a descripve name for the device.

IP Address

Enter the device's IP address. The IP address of the device is obtained automacally in this

adding mode.

Port

You can customize the port number. The port number of the device is obtained automacally

in this adding mode.

User Name

By default, the user name is admin.

Password

DS-K1T680 Series Face Recognion Terminal User Manual