User Manual

8.5.15 Set Access Control and Authencaon Parameters
Set the access control parameters and the authencaon parameters.
Set Authencaon Parameters
Click Conguraon → Access Control → Authencaon Sengs .
Figure 8-12 Authencaon Parameters Sengs
Click Save to save the sengs aer the conguraon.
Authencaon
Select an authencaon mode according to your actual needs from the drop-down list.
Display Result with
Check Face Picture, Name, or Employee ID. When authencaon is completed, the system will
display the selected contents in the result.
Min.
Recognion Interval
If the interval between card presenng of the same card is less than the congured value, the
card presenng is invalid.
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
Figure 8-13 Door Parameters
Sengs Page
Click Save to save the sengs aer the conguraon.
Door Contact
You can select Remain Open or Remain Closed according to your actual needs. By default, it is
Remain Closed.
Open
Duraon
Set the door unlocking duraon. If the door is not opened for the set me, the door will be
locked.
DS-K1T680 Series Face Recognion Terminal User Manual
75