User Manual

Figure 8-11 Device No. Sengs
Click Save to save the sengs aer the conguraon.
Device Type
The device can be used as a door staon or outer door staon. Select a device type from the
drop-down list.
Note
If you change the device type, you should reboot the device.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Floor No.
Set the device installed
oor No.
No.
If you select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Set Linked Network Sengs
Click Conguraon → Video Intercom → Linked Network Sengs .
You can set the device type, the SIP server's IP address, and the main
staon's IP address.
Aer seng the parameters, you can communicate among the access control device, door staon,
indoor staon, main staon, and the plaorm.
Click Save to save the sengs aer the conguraon.
DS-K1T680 Series Face Recognion Terminal User Manual
74