User Manual

Note
The Aendance Property will not be changed.
5.
Oponal: Select an status and change its name if required.
6. Set the status' schedule. Refers to Time
Sengs for details.
Set Manual and Auto Aendance via Web
Set the aendance mode as Manual and Auto, and the system will automacally change the
aendance status according to the congured schedule. At the same me you can manually
change the aendance status aer the authencaon.
Before You Start
Add at least one user, and set the user's
authencaon mode. For details, see User Management.
Steps
1. Click Conguraon → Aendance to enter the sengs page.
2. Set the
Aendance Mode as Manual and Auto.
3. Enable the Aendance Status funcon.
4. Enable a group of aendance status.
Note
The Aendance Property will not be changed.
5. Oponal: Select an status and change its name if required.
6. Set the status' schedule. Refers to Time Sengs for details.
Result
On the inial page and authencate. The authencaon will be marked as the congured
aendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a status to take aendance manually, the authencaon will be marked as the edited
aendance status.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
8.5.14 Set Video Intercom Parameters
The device can be used as a door
staon or outer door staon. You should set the device No.
before usage.
Set Device No.
Click Conguraon → Video Intercom → Device No. .
DS-K1T680 Series Face Recognion Terminal User Manual
73