User Manual

Steps
1. Click
Conguraon → Image → Supplement Light Parameters .
Figure 8-10 Supplement Light
Sengs Page
2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON,
you should set the brightness.
8.5.13 Time and
Aendance Sengs
If you want to track and monitor when the persons start/stop work and monitor their working
hours and late arrivals, early departures,
me taken on breaks, and absenteeism, you can add the
person to the shi group and assign a shi schedule (a rule for the aendance dening how the
schedule repeats, the
shi type, break sengs, and the card swiping rule.) to the shi group to
dene the aendance parameters for the persons in the shi group.
Disable
Aendance Mode via Web
Disable the aendance mode and the system will not display the aendance status on the inial
page.
Steps
1. Click Conguraon → Aendance to enter the sengs page.
2. Set the
Aendance Mode as Disable.
Result
You will not view or
congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
Time
Sengs
Steps
1. Click
Conguraon → Time Sengs to enter the sengs page.
2. Select Status Type.
3. Oponal: Edit Schedule Name according to the actual needs.
4. Drag mouse to set the schedule.
DS-K1T680 Series Face Recognion Terminal User Manual
71