User Manual

Note
You can set the voice volume between 0 and 10.
Time Sengs
Set the me zone, the device me and the DST.
Language
Select the language according to actual needs.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
7.7 Set Biometric Parameters
You can customize the face parameters to improve the face recognion performance. The
congurable parameters includes face an-spoong, liveness security level, pitch angle, yaw angle,
pupillary distance, and WDR.
Long tap on the
inial page for 3 s and login the home page. Tap Biometric.
Table 7-1 Face Picture Parameters
Parameter Descripon
Applicaon Mode Select either others or indoor according to actual environment.
Face An-Spoong Enable or disable the face an-spoong funcon. If enabling the
funcon, the device can recognize whether the person is a live one or
not.
Note
Biometric recognion products are not 100% applicable to an-spoong
environments. If you require a higher security level, use mulple
authencaon modes.
Face Liveness Level Aer enabling face an-spoong funcon, you can set the matching
security level when performing live face authencaon.
Face Recognion
Distance
Set the valid distance between the user and the camera when
authencang.
DS-K1T680 Series Face Recognion Terminal User Manual
47