User Manual

ManualsBrandsHikvision ManualsAccess Control ProductsUltra Series Wall-Mounted Face Access Terminal

Table Of Contents

Legal Information
Symbol Conventions
Regulatory Information
Safety Instruction
Available Models
Chapter 1 Overview
- 1.1 Overview
- 1.2 Features
Chapter 2 Appearance
Chapter 3 Installation
- 3.1 Installation Environment
- 3.2 Flush Mounting with Gang Box
- 3.3 Surface Mounting
Chapter 4 Wiring
- 4.1 Terminal Description
- 4.2 Wire Normal Device
- 4.3 Wire Secure Door Control Unit
- 4.4 Wire Fire Module
  - 4.4.1 Wiring Diagram of Door Open When Powering Off
  - 4.4.2 Wiring Diagram of Door Locked When Powering Off
Chapter 5 Activation
- 5.1 Activate via Device
- 5.2 Activate via Web Browser
- 5.3 Activate via SADP
- 5.4 Activate Device via Client Software
Chapter 6 Quick Operation
- 6.1 Select Language
- 6.2 Set Application Mode
- 6.3 Set Network Parameters
- 6.4 Link to Mobile Client
- 6.5 Set Administrator
Chapter 7 Basic Operation
- 7.1 Login
  - 7.1.1 Login by Administrator
  - 7.1.2 Login by Activation Password
- 7.2 Communication Settings
- 7.3 User Management
- 7.4 Data Management
- 7.5 Identity Authentication
  - 7.5.1 Authenticate via Single Credential
  - 7.5.2 Authenticate via Multiple Credential
- 7.6 Basic Settings
- 7.7 Set Biometric Parameters
- 7.8 Set Access Control Parameters
- 7.9 Time and Attendance Status Settings
- 7.10 System Maintenance
- 7.11 Video Intercom
Chapter 8 Operation via Web Browser
- 8.1 Login
- 8.2 Live View
- 8.3 Person Management
- 8.4 Search Event
- 8.5 Configuration
Chapter 9 Client Software Configuration
- 9.1 Configuration Flow of Client Software
- 9.2 Device Management
  - 9.2.1 Add Device
  - 9.2.2 Reset Device Password
- 9.3 Group Management
- 9.4 Person Management
- 9.5 Configure Schedule and Template
  - 9.5.1 Add Holiday
  - 9.5.2 Add Template
- 9.6 Set Access Group to Assign Access Authorization to Persons
- 9.7 Configure Advanced Functions
- 9.8 Configure Linkage Actions for Access Control
- 9.9 Door Control
  - 9.9.1 Control Door Status
  - 9.9.2 Check Real-Time Access Records
- 9.10 Event Center
- 9.11 Time and Attendance
Appendix A. Tips for Scanning Fingerprint
Appendix B. Tips When Collecting/Comparing Face Picture
Appendix C. Tips for Installation Environment
Appendix D. Dimension
Appendix E. Function Differences
Appendix F. Communication Matrix and Device Command

Note

The card can be normal IC card, or encrypted card.

QR Code

Put the QR code in front of the device camera to authencate via QR code.

Note

Authencaon via QR code should be supported by the device.

Password

Enter the password to authencate via password.

If authencaon completed, a prompt "Authencated" will pop up.

7.5.2

Authencate via Mulple Credenal

Before You Start

Set the user

authencaon type before authencaon. For details, see Set Authencaon Mode .

Steps

1. If the authencaon mode is Card and Face, Password and Face, Card and Password, Card and

Face and Fingerprint, authencate any credenal according to the instrucons on the live view

page.

Note

• The card can be normal IC card, or encrypted card.

• If the QR Code Scanning

funcon is enabled, you can put the QR code in front of the device

camera to authencate via QR code.

2. Aer the previous credenal is authencated, connue authencate other credenals.

Note

• For detailed

informaon about scanning ngerprint, see Tips for Scanning Fingerprint.

• For detailed informaon about authencang face, see Tips When Collecng/Comparing Face

Picture.

If authencaon succeeded, the prompt "Authencated" will pop up.

7.6 Basic

Sengs

You can set the shortcut key, voice, me, language, community No., building No., and Unit No.

Long tap on the inial page for 3 s and slide to the le/right by following the gesture and login the

device home page. Tap Basic.

DS-K1T680 Series Face Recognion Terminal User Manual