User Manual

Normal User
The User is the normal user. The user can only authencate or take aendance on the inial
page.
10. Tap
to save the sengs.
7.3.3 Add Fingerprint
Add a ngerprint for the user and the user can authencate via the added ngerprint.
Steps
Note
• The
funcon should be supported by the device.
• Up to 10,000 ngerprints can be added.
1. Long tap on the inial page for 3 s and slide to the le/right by following the gesture and enter
the device backend.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID.
eld and edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a
combinaon of lower
leers, upper leers, and numbers.
• The employee ID should not start with 0 and should not be duplicated.
4. Tap the Name eld and input the user name on the so keyboard.
Note
• Numbers, upper case
leers, lower case leers, and special characters are allowed in the user
name.
• The suggested user name should be within 32 characters.
5. Tap the Fingerprint eld to enter the Add Fingerprint page.
6. Follow the
instrucons to add a ngerprint.
Note
• The same
ngerprint cannot be repeatedly added.
• Up to 10 ngerprints can be added for one user.
• You can also use the client
soware or the ngerprint recorder to record ngerprints.
For details about the instrucons of scanning ngerprints, see Tips for Scanning Fingerprint .
7. Set the user role.
Administrator
DS-K1T680 Series Face Recognion Terminal User Manual
39