User Manual

Before You Start
Acvate the device and select an applicaon mode.
Steps
1.
Oponal: Tap Skip to skip adding administrator if required.
2. Enter the administrator's name
(oponal) and tap Next.
Figure 6-5 Add Administrator Page
3. Select a credenal to add.
Note
Up to one credenal should be added.
-
: Face forward at the camera. Make sure the face is in the face recognion area. Click
to capture and click to conrm.
-
: Press your nger according to the instrucons on the device screen. Click to conrm.
-
: Enter the card No. or present card on the card presenng area. Click OK.
4. Click OK.
You will enter the authencaon page.
DS-K1T680 Series Face Recognion Terminal User Manual
27