User Manual

Persons in this schedule do not need to check-in when they come to work.
Check-out Not Required
Persons in this schedule do not need to check-out when they end work.
Scheduled on Holidays
On the holidays, this schedule is sll eecve and the persons needs to go to work according
to the schedule.
Eecve for Overme
The persons' overme will be recorded for this schedule.
8. Click Save.
Set Person Schedule
You can assign the shi schedule to one or more persons. You can also view and edit the person
schedule details.
Before You Start
Add department and person in Person module. See Person Management for details.
Steps
Note
The person schedule has the higher priority than department schedule.
1. Click Time & Aendance → Shi Schedule to enter the Shi Schedule page.
2. Click Person Schedule to enter Person Schedule page.
3. Select the organizaon and select the person(s).
4. Select the
shi from the drop-down list.
5. Oponal: Enable Mulple Shi Schedules and select the eecve me period(s) from the
added
metables for the persons.
Note
This is only available for shi with only one metable.
Mulple Shi Schedules
It contains more than one metables. The person can check in/out in any of the metables
and the aendance will be eecve.
If the mulple shi schedules contains three metables: 00:00 to 07:00, 08:00 to 15:00 and
16:00 to 23:00. The
aendance of the person adopng this mulple shi schedules will be
eecve in any of the three metables. If the person checks in at 07:50, it will apply the
nearest metable 08:00 to 15:00 to the person's aendance.
6. Set the start date and end date.
7. Set other parameters for the schedule.
DS-K1T680 Series Face Recognion Terminal User Manual
153