User Manual

Note
If you select MySql, you should import the conguraon le (libmysql.dll) from local PC.
5. Set the other required parameters of the third-party database, including server IP address,
database name, user name and password.
6. Set table parameters of database according to the actual
conguraon.
1) Enter the table name of the third-party database.
2) Set the mapped table elds between the client soware and the third-party database.
7.
Click Save to test whether database can be connected and save the sengs for the successful
connecon.
• The aendance data will be wrien to the third-party database.
• During synchronizaon, if the client disconnects with the third-party database, the client will
start
reconnecon every 30 mins. Aer being reconnected, the client will synchronize the
data recorded during the disconnected me period to the third-party database.
Congure
Break Time
You can add break me and set start me, end me, duraon, calculaon mode and other
parameters for the break. The added break
me can also be edited or deleted.
Steps
1. Click Time & Aendance → Timetable .
The added metables are displayed in the list.
2. Select an added
metable or click Add to enter seng metable page.
3. Click Break Time to enter Break Time page.
4. Click Break Time Sengs.
5. Add break
me.
1) Click Add.
2) Enter a name for the break
me.
3) Set related parameters for the break me.
Start Time / End Time
Set the me when the break starts and ends.
No Earlier Than / No Later Than
Set the earliest swiping me for starng break and the latest swiping me for ending
break.
Break Duraon
The duraon from start me to end me of the break.
Calculaon
Auto Deduct
DS-K1T680 Series Face Recognion Terminal User Manual
146