User Manual

ManualsBrandsHikvision ManualsAccess Control ProductsUltra Series Wall-Mounted Face Access Terminal

141

142

143

144

145

146

147

148

149

150

Table Of Contents

Legal Information
Symbol Conventions
Regulatory Information
Safety Instruction
Available Models
Chapter 1 Overview
- 1.1 Overview
- 1.2 Features
Chapter 2 Appearance
Chapter 3 Installation
- 3.1 Installation Environment
- 3.2 Flush Mounting with Gang Box
- 3.3 Surface Mounting
Chapter 4 Wiring
- 4.1 Terminal Description
- 4.2 Wire Normal Device
- 4.3 Wire Secure Door Control Unit
- 4.4 Wire Fire Module
  - 4.4.1 Wiring Diagram of Door Open When Powering Off
  - 4.4.2 Wiring Diagram of Door Locked When Powering Off
Chapter 5 Activation
- 5.1 Activate via Device
- 5.2 Activate via Web Browser
- 5.3 Activate via SADP
- 5.4 Activate Device via Client Software
Chapter 6 Quick Operation
- 6.1 Select Language
- 6.2 Set Application Mode
- 6.3 Set Network Parameters
- 6.4 Link to Mobile Client
- 6.5 Set Administrator
Chapter 7 Basic Operation
- 7.1 Login
  - 7.1.1 Login by Administrator
  - 7.1.2 Login by Activation Password
- 7.2 Communication Settings
- 7.3 User Management
- 7.4 Data Management
- 7.5 Identity Authentication
  - 7.5.1 Authenticate via Single Credential
  - 7.5.2 Authenticate via Multiple Credential
- 7.6 Basic Settings
- 7.7 Set Biometric Parameters
- 7.8 Set Access Control Parameters
- 7.9 Time and Attendance Status Settings
- 7.10 System Maintenance
- 7.11 Video Intercom
Chapter 8 Operation via Web Browser
- 8.1 Login
- 8.2 Live View
- 8.3 Person Management
- 8.4 Search Event
- 8.5 Configuration
Chapter 9 Client Software Configuration
- 9.1 Configuration Flow of Client Software
- 9.2 Device Management
  - 9.2.1 Add Device
  - 9.2.2 Reset Device Password
- 9.3 Group Management
- 9.4 Person Management
- 9.5 Configure Schedule and Template
  - 9.5.1 Add Holiday
  - 9.5.2 Add Template
- 9.6 Set Access Group to Assign Access Authorization to Persons
- 9.7 Configure Advanced Functions
- 9.8 Configure Linkage Actions for Access Control
- 9.9 Door Control
  - 9.9.1 Control Door Status
  - 9.9.2 Check Real-Time Access Records
- 9.10 Event Center
- 9.11 Time and Attendance
Appendix A. Tips for Scanning Fingerprint
Appendix B. Tips When Collecting/Comparing Face Picture
Appendix C. Tips for Installation Environment
Appendix D. Dimension
Appendix E. Function Differences
Appendix F. Communication Matrix and Device Command

Set Wiegand Parameters

You can set the access control device's Wiegand channel and the communicaon mode. Aer

seng

the Wiegand parameters, the device can connect to Wiegand card reader via Wiegand

communicaon.

Steps

Note

This funcon should be supported by the device.

1. Enter the Access Control module.

2. On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

3. Select an access control device in the device list and click Wiegand to enter the Wiegand

Sengs page.

4. Set the switch to on to enable the Wiegand funcon for the device.

5. Select the Wiegand channel No. and the communicaon mode from the drop-down list.

Note

If you set Communicaon Direcon as Sending, you are required to set the Wiegand Mode as

Wiegand 26 or Wiegand 34.

6. Check Enable Wiegand to enable the Wiegand funcon.

7. Click Save.

• The

congured parameters will be applied to the device automacally.

• Aer changing the communicaon direcon, the device will reboot automacally.

Enable M1 Card

Encrypon

M1 card encrypon can improve the security level of authencaon.

Steps

Note

The funcon should be supported by the access control device and the card reader.

1. Enter the Access Control module.

2. On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

3. Select an access control device in the device list and click M1 Card Encrypon Vericaon to

enter the M1 Card

Encrypon Vericaon page.

4. Set the switch to on to enable the M1 card encrypon funcon.

5. Set the sector ID.

DS-K1T680 Series Face Recognion Terminal User Manual

130