User Manual

Note
All persons' face pictures will be exported if you do not select any organizaon.
3. Click Export to open the Export panel and check Face as the content to export.
4. Click Export to start
exporng.
Note
• The exported
le is in ZIP format.
• The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face).
9.4.18 Get Person Informaon from Access Control Device
If the added access control device has been congured with person informaon (including person
details, ngerprint, and issued card informaon), you can get the person informaon from the
device and import them to the client for further
operaons.
Steps
Note
• If the person name stored in the device is empty, the person name will be
lled with the issued
card No. aer imporng to the client.
• The gender of the persons will be Male by default.
• If the card number or person ID (employee ID) stored on the device already exists in the client
database, the person with this card number or person ID will not be imported to the client.
1. Enter Person module.
2. Select an
organizaon to import the persons.
3. Click Get from Device.
4. Select the access control device from the drop-down list.
5. Click Get to start
imporng the person informaon to the client.
The person informaon, including person details, person's ngerprint informaon (if
congured), and the linked cards (if congured), will be imported to the selected organizaon.
9.4.19 Move Persons to Another
Organizaon
You can move the added persons to another organizaon if you need.
Before You Start
• Make sure you have added at least two
organizaons.
• Make sure you have imported person informaon.
Steps
1. Enter Person module.
DS-K1T680 Series Face Recognion Terminal User Manual
105