User Manual

3.3 Surface Mounng
Steps
1. According to the datum line on the mounng template, sck the mounng template on the wall
or other surface, 1.4 meters higher than the ground.
Figure 3-3 Mounng Template
2. Drill 4 holes on the wall or other surface according to the mounng template.
3. Insert the screw sockets of the setscrews in the drilled holes.
Figure 3-4 Insert Screw Socket
4. Align the 4 holes to the mounng plate with the drilled holes.
5. Remove the sheet indicated on the image below by using the
at tongs.
DS-K1T671-3XF Series Face Recognion Terminal User Manual
7