Spec Sheet

© 2020 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: [phone] • Toll Free in USA: [phone] • E-Mail: [e-mail] • www.hikvision.com 050420NA 
DS-K1T671TM-3XF
Temperature Screening Terminal
S-K1T671TM-
Hikvision’s DS-K1T671TM-3XF terminal is an access control
device integrated with high accuracy temperature screening. It
can quickly measure skin-surface temperature and notify the
user about abnormal readings. This product is perfect for many
applications, including office buildings, transportation hubs,
retail facilities, education centers, and many others.
Available Model
DS-K1T671TM-3XF
•
Vanadium Oxide Uncooled Sensor Measures Target’s Temperature
•
Measuring Range: 86° to 113° F (30° to 45° C), Accuracy: ±0.5° C w/o Black Body Calibration
•
Recognition Distance: 0.5 m to 1.5 m
•
Fast Temp. Measurement Mode: Detects Face, Takes Skin-Surface Temp. w/o Identity Authentication
•
Multiple Authentication Modes: Card/Temperature, Face/Temperature, Card/Face/Temperature, etc.
•
Face Mask Detection: If Maskless Face Detected, Voice Reminder Prompt Sounds
- Face Mask Alert: Authentication or Attendance Is Valid
- Forced Mask Wearing Alert: Authentication or Attendance Fails
•
Displays Temperature Measurement Results on Authentication Page
•
Triggers Voice Prompt when Detecting Abnormal Temperature
•
Configurable Door Status (Open/Close) when Detecting Abnormal Temperature
•
Transmits Online and Offline Temperature Information to Client Software via TCP/IP Communication
and Saves Data on Client Software
•
Face Recognition Duration <0.2 s/User; Face Recognition Accuracy Rate ≥99%
•
50,000 Face Capacity, 50,000 Card Capacity, and 100,000 Event Capacity
•
Suggested Height for Face Recognition: Between 1.4 m and 1.9 m
•
Attendance Status: Check In, Check Out, Break In, Break Out, Overtime In, Overtime Out
•
Watchdog Design and Tamper Function
•
Audio Prompt for Authentication Result
•
NTP, Manual Time Synchronization, and Auto Synchronization
•
Connects to External Access Controller or Wiegand Card Reader via Wiegand Protocol
•
Connects To Secure Door Control Unit via RS-485 Protocol To Avoid Door Opening if Terminal Destroyed
•
Imports and Export Data to the Device from the Client Software
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple
authentication modes.
* In order to get an accurate temperature reading, wait 90 minutes for the device to warm up after the device is powered on.