User Manual

Result
On the inial page and authencate. The authencaon will be marked as the congured
aendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a status to take
aendance manually, the authencaon will be marked as the edited
aendance status.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
8.5.18 Set Video Intercom Parameters
The device can be used as a door staon, outer door staon, or access control device. You should
set the device No. before usage.
Click
Conguraon → Video Intercom → Device No. .
If set the device type as Door Staon or Access Control Device, you can set the period No.,
building No., unit No.,
oor No., door staon No., and community No.
Click Save to save the sengs aer the conguraon.
Figure 8-12 Device No. Sengs
Device Type
The device can be used as a door staon or outer door staon. Select a device type from the
drop-down list.
Note
If you change the device type, you should reboot the device.
Period No.
Set the device installed period No.
Building No.
Set the device installed building No.
Face Recognion Terminal User Manual
80