User Manual

Present the card on the card presenng area and start authencaon via card.
Note
The card can be normal IC card, or encrypted card.
QR Code
Put the QR code in front of the device camera to authencate via QR code.
Note
Authencaon via QR code should be supported by the device.
Password
Enter the password to authencate via password.
If authencaon completed, a prompt "Authencated" will pop up.
7.5.2
Authencate via Mulple Credenal
Before You Start
Set the user authencaon type before authencaon. For details, see Set Authencaon Mode .
Steps
1. If the authencaon mode is Card and Face, Password and Face, Card and Password, Card and
Face and Fingerprint,
authencate any credenal according to the instrucons on the live view
page.
Note
• The card can be normal IC card, or encrypted card.
• If the QR Code Scanning
funcon is enabled, you can put the QR code in front of the device
camera to authencate via QR code.
2. Aer the previous credenal is authencated, connue authencate other credenals.
Note
• For detailed
informaon about scanning ngerprint, see Tips for Scanning Fingerprint.
• For detailed informaon about authencang face, see Tips When Collecng/Comparing Face
Picture.
If authencaon succeeded, the prompt "Authencated" will pop up.
7.6 Basic
Sengs
You can set the shortcut key, voice, me, language, supplement light, community No., building No.,
Unit No., beauty, and
adversement.
Face Recognion Terminal User Manual
46