User Manual

• If you do not
congure the applicaon mode and tap Next, the system will select Indoor by
default.
• If you acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.3 Set Administrator
Aer device acvaon, you can add an administrator to manage the device parameters.
Before You Start
Acvate the device and select an applicaon mode.
Steps
1.
Oponal: Tap Skip to skip adding administrator if required.
2. Enter the administrator's name (oponal) and tap Next.
Face Recognion Terminal User Manual
26