User Manual

Table Of Contents

Report Name

Enter a name for the report.

Report Type

Select one report type and this report will be generated.

Report Time

The me to be selected may vary for dierent report type.

Person

Select the added person(s) whose

aendance records will be generated for the report.

Note

You can view the selected person(s) in the right side of the Person area.

5. Set the schedule to send the report to the email address(es) automacally.

Note

The Auto-Send Email funcon is enabled by default.

1) Set the Eecve Period during which the client will send the report on the selected sending

date(s).

2) Select the Sending Date(s) on which the client will send the report.

3) Set the Sending Time at which the client will send the report.

Example

If you set the

eecve period as 2018/3/10 to 2018/4/10, select Friday as the sending date,

and set the sending

me as 20:00:00, the client will send the report at 8 p.m. on Fridays

during 2018/3/10 to 2018/4/10.

Note

Make sure the aendance records are calculated before the sending me. You can calculate

the aendance data manually, or set the schedule so that the client can calculate the data

automacally every day. For details, refer to Calculate Aendance Data .

4) Enter the receiver email address(es).

Note

Up to 5 email addresses can be added. You can click + to add a new email address.

5) Oponal: Click Preview to view the email details.

6. Click OK.

Oponal: Aer adding the custom report, you can do one or more of the followings: