User Manual

Table Of Contents
Set Enable T&A Status switch to on to calculate the actual break me according to
aendance status on the device.
Note
This funcon should be supported by the device.
Valid
Authencaon Interval
During the valid authencaon interval, person swiping card for several mes will only
be calculated as once when
calculang aendance data.
6. Click Save to save the sengs.
7. Oponal: Click Add to connue adding break me.
Congure
Report Display
You can congure display contents displayed in the aendance report, such as the company name,
logo, date format,
me format, and mark.
Steps
1. Enter Time & Aendance module.
2. Click Aendance Stascs → Report Display .
3. Set the display
sengs for aendance report.
Company Name
Enter a company name to display the name in the report.
Aendance Status Mark
Enter the mark and select the color. The related elds of aendance status in the report will
display with the mark and color.
Weekend Mark
Enter the mark and select the color. The weekend
elds in the report will display with the
mark and color.
4. Click Save.
9.11.2 Add General Timetable
On the metable page, you can add general metable for employees, which requires the xed
start-work me and end-work me. Also, you can set valid check-in/out me, allowable metable
for being late and leaving early.
Steps
1. Click Time and Aendance → Timetable to enter the metable sengs page.
2. Click Add to enter add metable page.
Face Recognion Terminal User Manual
164