Users Manual
7.2.1 Add Device
The client provides three device adding modes including by IP/domain, IP segment, and ISUP
protocol. The client also supports imporng mulple devices in a batch when there are large
amoun
t of devices to be added.
Add Online Device
The acve online devices in the same local subnet with the client soware will be displayed on the
Online De
vice area. You can click Refresh Every 60s to refresh the informaon of the online
devices.
Add a Detected Online Device
You can select a detected online device displayed in the online device list and add it to the client.
Steps
1. Enter the Device Management module.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Select an online device in the Online Device area, and click Add to open the device adding
window.
Note
For the inacve device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to .
5. Enter the required informaon.
Name
Enter a descripve name for the device.
IP Address
Enter the device's IP address. The IP address of the device is obtained automacally in this
adding mode.
P
ort
You can customize the port number. The port number of the device is obtained automacally
in this adding mode.
User Name
B
y default, the user name is admin.
Password
Face Recognion Terminal User Manual
68