Users Manual
6.10.2 Set Auto Aendance via Device
Set the aendance mode as auto, and you can set the aendance status and its available schedule.
The system will automacally change the
aendance status according to the congured
parameters.
Be
fore You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Aendance Mode as Auto.
Figure 6-19 Auto Aendance Mode
3. Select an aendance status and set its schedule.
Face Recognion Terminal User Manual
58