Users Manual

Note
The card No. cannot be empty.
Up to 20 characters are allowed in the card No.
The card No. cannot be duplicated.
7. Enable or disable the Adminis
trator Permission funcon.
Enable Administrator Permission
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Disable Administrator Permission
The User is the normal user. The user can only authencate or take aendance on the inial
page.
8. Tap
to save the
sengs.
6.4.4 Add Password
Add a password for the user and the user can authencate via the password.
Steps
1. Long tap on the inial page and login.
2. T
ap User → + to enter the Add User page.
3. Tap the Employee ID. eld and edit the employee ID.
Note
The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper
leers, and numbers.
The employee ID should not be duplicated.
4. T
ap the Name eld and input the user name on the so keyboard.
Note
Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
Up to 32 characters are allowed in the user name.
5. T
ap the Password eld and create a password and conrm the password.
Note
Only numbers are allowed in the password.
Up to 8 characters are allowed in the password.
6. Enable or disable the Adminis
trator Permission funcon.
Face Recognion Terminal User Manual
42