Users Manual
Note
The maximum duraon for adding a face picture is 15s. You can check the remaining me for
adding a f
ace picture on the le of the page.
9. Enable or disable the Adminis
trator Permission funcon.
Enable Administrator Permission
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Disable Administrator Permission
The User is the normal user. The user can only authencate or take aendance on the inial
page.
10. Tap
to save the
sengs.
6.4.3 Add Card
Add a card for the user and the user can authencate via the added card.
Steps
Note
Up to 5000 cards can be added.
1. Long t
ap on the inial page and login.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID. eld and edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper
leers, and numbers.
• The employee ID should not be duplicated.
4. T
ap the Name eld and input the user name on the so keyboard.
Note
• Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
• Up to 32 characters are allowed in the user name.
5. T
ap the Card eld and input the card No.
6. Congure the card No.
-
Enter the card No. manually.
-
Swipe the card over the card swiping area to get the card No.
Face Recognion Terminal User Manual
41