Users Manual

6.3.2 Set Wi-Fi Parameters
You can enable the Wi-Fi funcon and set the Wi-Fi related parameters.
Steps
1. Tap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon
Sengs
page.
2. On the Communicaon Sengs page, tap Wi-Fi to enter the Wi-Fi tab.
Figure 6-6 Wi-Fi
Sengs
3. Enable the Wi-Fi funcon.
4. Select a Wi-Fi in the lis
t to enter the Wi-Fi parameters sengs page.
5. Select an IP mode.
-
If
selecng DHCP, you should input the Wi-Fi password.
-
If selecng Stac, you should input the Wi-Fi password, IP address, subnet mask and
gateway.
Face Recognion Terminal User Manual
35