Users Manual
Figure 3-10 Secure Device
4. Route the cable through the bracket and connect it with the terminals on the turnsle.
5. Install the bracket on the turnsle.
3.3.2 Bracket Mounng II
Before You Start
•
Select the mounng method according to your actual situaon.
• Make sure the ground surface has drilled holes for device installaon.
Steps
Note
The device should be installed on the concrete surface or other non-ammable surfaces.
1. Use 2 supplied scr
ews (SC-KM4×18-GB819) to secure the mounng plate on the bracket.
Face Recognion Terminal User Manual
12