Users Manual
3.2.2 Surface Mounng
Steps
Note
• The addional force shall be equal to three mes the weight of the equipment. The equipment
ad its associa
ted mounng means shall remain secure during the installaon. Aer the
installaon, the equipment, including any associated mounng plate, shall not be damaged.
• Select the mounng method according to your actual situaon.
1. Acc
ording to the datum line on the mounng template, sck the mounng template on the wall
or other surfaces, 1.4 meters higher than the ground.
Figure 3-5 Mounng Template
2. Drill holes on the w
all or other surface according to the Hole 2 on the mounng template.
3. Align the holes to the mounng plate and secure the mounng plate on the wall with the 4
supplied screws (KA4×22).
Face Recognion Terminal User Manual
8