Users Manual

The distance percentage from the face top side to the top margin in the recognion area.
The actual distance percentage should be larger than the congured value when face picture
authencaon. Other percentages, distances, and angles should also meet their condions.
Margin (Boom)
The distance percentage from the face boom side to the boom margin in the recognion
area.
The actual distance percentage should be larger than the congured value when face picture
authencaon. Other percentages, distances, and angles should also meet their condions.
Pupillary Distance
The minimum resoluon between two pupils when face recognion.
The actual resoluon should be larger than the congured value.
Score
The device will score the captured picture according to the yaw angle, pitch angle, and
pupillary distance. If the score is less than the congured value, face recognion will be
failed.
You can set the face picture parameters when authencang.
4. Click Save.
7.12.15 Congure
Supplement Light Parameters
You can turn on or o the supplement light. You can also adjust the supplement light brightness.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click
to enter the remote conguraon page.
3. Click Other → Supplemen
t Light Parameters to enter the Conguring Supplement Light
Parameters page.
4. Select a supplement light type from the drop-down list.
5. Select a supplement light mode from the drop-down list.
6. Oponal: Se
t the supplement light brightness.
7. Click Save to save the sengs.
7.12.16 Congure Video and Audio Parameters
You can set the device camera's image quality, resoluon and other parameters.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click
to enter the remote conguraon page.
3. Click Imag
e → Video & Audio to enter the sengs page.
Face Recognion Terminal User Manual
150