Users Manual

If you check Synchronize with Computer Time, the Set Time will display the current computer's
me. At this me, uncheck Synchronize with Computer Time, and click , you can edit the
device me manually.
Click Save to save the sengs.
DST
On the Device for Management page, click Remote Conguraon → System → Time → DST to
enter the DST tab.
Enable DST and you can edit the DST bias me, the DST start me, and end me.
Click Save.
7.12.5 System Maintenance
You can reboot the device remotely, restore the device to default sengs, import conguraon
le, upgrade the device, etc.
Reboot
On the Device for Management page, click → System → System Maintenance to enter the
System Maintenance tab.
Click Reboot and the device starts reboong.
Restore Sengs
On the Device for Management page, click R
emote Conguraon → System → System
Maintenance to enter the System Maintenance tab.
Restore Default
The parameters will be restored the default ones, excluding the IP address.
Restore Part of Sengs
Restore all sengs except communicaon
sengs and the remote user sengs to default ones.
Restore All
All device parameters will be restored to the default ones. The device should be acvated
aer
restoring.
Import and Export
On the Device for Management page, click R
emote Conguraon → System → System
Maintenance to enter the System Maintenance tab.
Import or export conguraon le.
Import
Conguraon File
Import the conguraon le from the local PC to the device.
Face Recognion Terminal User Manual
144