Users Manual
Note
If you select MySql, y
ou should import the conguraon le (libmysql.dll) from local PC.
5. Se
t the other required parameters of the third-party database, including server IP address,
database name, user name and password.
6. Set table parameters of database according to the actual conguraon.
1) Enter the table name of the third-party database.
2) Set the mapped table elds between the client soware and the third-party database.
7. Click Save to test whether database can be connected and save the sengs for the successful
connecon.
• The aendance data will be wrien to the third-party database.
• During synchronizaon, if the client disconnects with the third-party database, the client will
start reconnecon every 30 mins. Aer being reconnected, the client will synchronize the
data recorded during the disconnected me period to the third-party database.
Congure Break Time
You can add break me and set start me, end me, duraon, calculaon mode and other
parameters for the break. The added break me can also be edited or deleted.
St
eps
1. Click Time & Aendance → Timetable .
The added metables are displayed in the list.
2. Select an added metable or click Add t
o enter seng metable page.
3. Click Break Time to enter Break Time page.
4. Click Break Time Sengs.
5. Add break me.
1) Click Add.
2)
Enter a name for the break me.
3) Set related parameters for the break me.
Start Time / End Time
Set the
me when the break starts and ends.
No Earlier Than / No Later Than
Set the earliest swiping me for starng break and the latest swiping me for ending
break.
Break Duraon
The duraon from start me to end me of the break.
Calculaon
Auto Deduct
Face
Recognion Terminal User Manual
127