Quick Start Guide

Device Wiring (Normal)
2
White Light
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images
and all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(hps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng
the Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example,
for device with facial recognion features, biometrics data is stored in your device with
encrypon method; for fingerprint device, only fingerprint template will be saved, which is
impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance
with the applicable data protecon laws and regulaons, including without limitaon,
conducng security controls to safeguard personal data, such as, implemenng reasonable
administrave and physical security controls, conduct periodic reviews and assessments of the
effecveness of your security controls.
DS-K1T331 Series
Face Time Aendance Terminal
Quick Start Guide
UD15536B-B
Installaon Environment
1
3
4
1
2
3
1 Installaon
2
Avoid backlight, direct sunlight, and indirect sunlight.
For beer recognion, there should be light source in or near the installaon environment.
Backlight Direct
Sunlight
Direct Sunlight
through Window
Indirect Sunlight
through Window
Close to Light
Installaon with Gang Box
Drill holes on the wall or other surface according to the mounng template and install the gang box.
Use two supplied screws (SC-KM4x25-SUS or KA4x22-SUS) to secure the mounng plate on the gang box.
Route the cables through the cable hole of the mounng plate, and connect the terminals with the external device’s
cables.
Align the device with the mounng plate and hang the device on the mounng plate.
Use one supplied screw to secure the device and the mounng plate.
Before you start:
According to the baseline on the mounng template, sck the mounng template on the wall or other surface,
1.45 meters higher than the ground.
Note: Make sure the output of external power supply fulfils LPS.
Note:
The installaon height here is the recommended height. You can change it according to your actual needs.
For easy installaon, drill holes on mounng surface according to the supplied mounng template.
You should purchase the gang box separately.
Mounng
Plate
Device
Gang Box
Wall
Base Mounng:
Route the cables through the cable hole of the bracket, and connect the terminals with external
device’s cable.
Align the device two holes with the two buckles on the bracket.
Hang the device on the bracket and make sure the buckle in the middle of the bracket is inserted in
the groove on the device back.
4
Place the assembled device and bracket on the desk or other flats.
Appearance and Dimension:
Camera Camera
microUSB
Interface
Screen
Tamper
Network Interface
Wiring Terminal
Debugging Port
Note: The figures are for reference only.
Network Interface
GND
GND
BTN
GND
C7
C6
C1
C2
C3
C4
C5
B1
B2
B3
Black
Orange
Yellow
Red
Black
Blue
Black
Green
White
Grey
Purple
Black
-
+
RS-485
Power Input
Group B
Door Lock
Group C
Power
Exit Button
Door
Contact
(Sensor)
Electric Dropbolt
Notes:
(COM)
(NO)
The power input should be 12 VDC, 1.5 A, 18 W.
Do not wire the device to the electric supply directly.
2
3
4
1
110 mm
120 mm
23 mm