Users Manual

Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The
precauon measure is divided into Dangers and Cauons:
Dangers: Neglecng any of the warnings may cause serious injury or death.
Cauons: Neglecng any of the cauons may cause injury or equipment damage.
Dangers: Follow these safeguards to prevent
serious injury or death.
Cauons: Follow these precauons to prevent
potenal injury or material damage.
Danger:
In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
1. This equipment is not suitable for use in
locaons where children are likely to be present.
2. CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
3. Improper replacement of the baery with an incorrect type may defeat a safeguard (for
example, in the case of some lithium
baery types).
4. Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,
which may result in an explosion.
5. Do not leave the baery in an extremely high temperature surrounding environment, which
may result in an explosion or the leakage of
ammable liquid or gas.
6. Do not subject the baery to extremely low air pressure, which may result in an explosion or
the leakage of
ammable liquid or gas.
7. Dispose of used baeries according to the instrucons.
This equipment is not suitable for use in locaons where children are likely to be present.
Never place the equipment in an unstable
locaon. The equipment may fall, causing serious
personal injury or death.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
All the electronic
operaon should be strictly compliance with the electrical safety regulaons,
re
prevenon regulaons and other related regulaons in your local region.
Please use the power adapter, which is provided by normal company. The power consumpon
cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause over-heat
or re hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle the
device.
When the product is installed on wall or ceiling, the device shall be
rmly xed.
DS-K1F600U-D6E Series Enrollment Staon Quick Start Guide
vi