DS-K1F600U-D6E Series Enrollment Station User Manual
DS-K1F600U-D6E Series Enrollment Station User Manual Legal Information ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
DS-K1F600U-D6E Series Enrollment Station User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed.
DS-K1F600U-D6E Series Enrollment Station User Manual Available Model Product Name Enrollment Station Model Description DS-K1F600U-D6E Supports enroll face and card No. DS-K1F600U-D6E-F Supports enroll face, fingerprint, and card No.
DS-K1F600U-D6E Series Enrollment Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
DS-K1F600U-D6E Series Enrollment Station User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
DS-K1F600U-D6E Series Enrollment Station User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death.
DS-K1F600U-D6E Series Enrollment Station User Manual • If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. • Do not ingest battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
DS-K1F600U-D6E Series Enrollment Station User Manual • Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. • Please take care of your card and report card loss in time when card is lost. • Multiple card types are supported. Please select an appropriate card type according to the card performance and the usage scenarios.
DS-K1F600U-D6E Series Enrollment Station User Manual Contents Chapter 1 Overview .................................................................................................................... 1 Chapter 2 Appearance ................................................................................................................ 2 Chapter 3 Activation ................................................................................................................... 4 3.1 Activate via Device ............
DS-K1F600U-D6E Series Enrollment Station User Manual 8.5.4 Other Settings ............................................................................................................. 28 8.6 Set Biometric Parameters .................................................................................................... 29 8.7 Data Management ............................................................................................................... 30 8.7.1 Import User .......................................
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 1 Overview Introduction Figure 1-1 Product Appearance The enrollment station can realize multiple user information's enrollment on one device. It supports enrolling face picture, fingerprint (parts of the device model support), 13.56 MHz IC card No., and 125KHz ID card No. Features • • • • • • 3.97-inch LCD touch screen for face recognition, parameters configuration, live view, etc.
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 2 Appearance Figure 2-1 Appearance Table 2-1 Appearance Description No. Description 1 PSAM3 Card Slot (Reserved) 2 PSAM4 Card Slot (Reserved) 3 Screen 4 Camera 5 Supplement Light 6 Camera 7 USB Interface Note For data import and export.
DS-K1F600U-D6E Series Enrollment Station User Manual No. Description Note For data communication. 11 PSAM Card Slot (Reserved) 12 Debugging Port Note For debugging use only. 13 PSAM Card Slot (Reserved) 14 Fingerprint Module Note Parts of the device models support.
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 3 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows: • The default IP address: 192.0.0.64 • The default port No.: 8000 • The default user name: admin 3.
DS-K1F600U-D6E Series Enrollment Station User Manual 3.2 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/en/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address.
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 4 Select Language After activation, you should select a language. Steps 1. After activation, tap OK on the pop-up window. You will enter the language page. Figure 4-1 Select Language 2. Select a language according to the actual needs. 3. Click Next to save the settings.
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 5 Enroll Administrator's Face After selecting language, you should enroll an administrator's face for further operation. The administrator can login the device backend to manage and configure data. Steps 1. After selecting the language, tap Next on the pop-up window. You will enter the face enrollment page. Figure 5-1 Face Enrollment Page 2. Enroll the administrator's face. and follow the instructions to enroll the face.
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 6 Enroll via Device 6.1 Enroll Face via Device Before You Start • Power on and activate the device. For details about the activation, see Activation . • Enable Face Required in Set Enrollment Rule after logging in the device backend. Steps 1. Tap on the initial page. 2.
DS-K1F600U-D6E Series Enrollment Station User Manual Note For details about face recognition, see Tips When Collecting/Comparing Face Picture . 5. Optional: Tap to edit the employee ID. 6.2 Enroll Fingerprint via Device Before You Start • Power on and activate the device. For details about the activation, see Activation . • Set fingers in Select Finger in Set Enrollment Rule after logging in the device backend. Steps 1. Tap on the initial page. 2.
DS-K1F600U-D6E Series Enrollment Station User Manual 3) Follow the instructions and press a finger on the fingerprint module. If the fingerprint is enrolled, the enrolled fingerprint on Select Finger page will turn to blue. 4) Optional: Tap the enrolled fingerprint (in blue) and tap OK in the dialogue box to clear the enrolled data and enroll a new fingerprint. 5. Optional: Tap to edit the employee ID. 6.3 Enroll Card via Device Before You Start • Power on and activate the device.
DS-K1F600U-D6E Series Enrollment Station User Manual Note The ID can only be set as the original length. 4. Optional: Tap to edit the employee ID.
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 7 Enroll via Client Software 7.1 Enroll Face via Client Software Before You Start • Download and install the client software on your computer before enrollment. • Power on and activate the device. For details about the activation, see Activation . Follow the steps below to enroll face. Figure 7-1 Flow Diagram of Enrolling Face Steps 1. Power on the device. 2. Place the device on the desk. 3. Login the client software on the computer. 4.
DS-K1F600U-D6E Series Enrollment Station User Manual The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark.
DS-K1F600U-D6E Series Enrollment Station User Manual 1) Enable Verify by Device to check whether the device managed in the client can recognize the face in the photo. 2) Select Enrollment Station from the drop-down list. 3) Click Login and set the enrollment station's IP address, port No., user name and password. 4) (Optional) Enable Face Anti-Spoofing and set the liveness level according to your actual needs. 5) Click OK. 7. Enroll face on the device.
DS-K1F600U-D6E Series Enrollment Station User Manual 2) Click Add on the upper left of the page. Figure 7-5 Add Organization 3) Create an organization name. Note Up to 10 levels of organizations can be added. The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark.
DS-K1F600U-D6E Series Enrollment Station User Manual Figure 7-6 Add Person Note Once the person information is expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors. 6. On the Credential → Fingerprint panel, click +. 7. Set enrollment station. Figure 7-7 Add Fingerprint Page - If the enrollment station is connected with the platform via USB interface, click Local.
DS-K1F600U-D6E Series Enrollment Station User Manual 1) Select Enrollment Station as the fingerprint recorder from the drop-down list. 2) Click Login and set the enrollment station's user name and password. 3) Click OK. - If the enrollment station is connected with the platform via the network, click Remote 1) Select Enrollment Station as the fingerprint recorder from the drop-down list. 2) Click Login and set the enrollment station's IP address, port No., user name and password. 3) Click OK. 8.
DS-K1F600U-D6E Series Enrollment Station User Manual Figure 7-9 Add Organization 3) Create an organization name. Note Up to 10 levels of organizations can be added. The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark.
DS-K1F600U-D6E Series Enrollment Station User Manual Figure 7-10 Add Person Note Once the person information is expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors. 6. On the Add window, Enter Credential → Card . 7. Click + → Settings . to add the card No. 8. Set enrollment station. - If the enrollment station is connected with the platform via USB interface, click Local.
DS-K1F600U-D6E Series Enrollment Station User Manual The card is used for opening doors for normal usage. Duress Card When the person is under duress, he/she can swipe the duress card to open the door. The door will be unlocked and the client will receive a duress event to notify the security personnel. Patrol Card This card is used for the inspection staff to check the their attendance of inspection.
DS-K1F600U-D6E Series Enrollment Station User Manual 3) Set the enrollment station's IP address, port No., user name and password. 3) Click OK. 5. Click Get All or Get Partially. Get All Import all person's information from the device to the platform. Get Partially After matching with the platform, all added person's information will be imported to the platform.
DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 8 Basic Operation 8.1 Login by Administrator Login the device backend to set the device basic parameters. If an administrator is added to the device, you can login by verifying the administrator's permission. Before You Start Add an administrator and add a face picture for the administrator. For details, see Add Administrator . Steps 1. Long tap on the initial page for 3 s to enter the administrator authentication page.
DS-K1F600U-D6E Series Enrollment Station User Manual 8.2 Add Administrator The administrator can login the device backend and configure the device parameters. Steps 1. Long tap on the initial page for 3 s and login the device home page. 2. Tap Admin to enter the Administrator page. Figure 8-3 Administrator Page 3. Set the administrator's parameters. - Edit the super administrator's parameters: Tap admin and edit the super administrator's face and password.
DS-K1F600U-D6E Series Enrollment Station User Manual • • • • • • Note By default, the system contains a super administrator (admin). You cannot edit its No., name, and type. and you cannot delete it. The admin user has higher permission level than other administrators. The administrator's No. and name cannot be edited on the device. You should authenticate the administrator before editing the other administrator's information. Up to 5 administrators can be added.
DS-K1F600U-D6E Series Enrollment Station User Manual After enabling WLAN, you should select a Wi-Fi for connection. Select a Wi-Fi and enable DHCP and enter the Wi-Fi's password to connect. Tap to connect the Wi-Fi. Or disable the DHCP function, and enter the Wi-Fi's password, IP address, subnet mask, and gateway. Tap to connect the Wi-Fi. Tap to disconnect the Wi-Fi. 8.4 Manage Enrollment You can view the enrolled person information and delete the enrolled data. Steps 1.
DS-K1F600U-D6E Series Enrollment Station User Manual 8.5 Basic Settings 8.5.1 Set Time You can set the device time format and the current time. Long tap on the initial page for 3 s and login the device home page. Tap Basic → Time . Figure 8-8 Time Settings Page You can set the device time format and the current time. 8.5.2 Set Sound Enable or disable the Keypad Sound and Voice Volume. You can also adjust the Voice Volume. Long tap on the initial page for 3 s and login the device home page.
DS-K1F600U-D6E Series Enrollment Station User Manual Note The available volume range is from 0 to 10. The larger the value, the louder the volume. 0 represents disable the voice prompt function. 8.5.3 Set Enrollment Rule Set the enrollment rules before data enrollment. Long tap on the initial page for 3 s and login the home page. Tap Basic → Enrollment Rules .
DS-K1F600U-D6E Series Enrollment Station User Manual Select Finger Set the enrolling fingers when enrolling a person's fingerprint. Card Number per User Set the maximum card number that a person can enroll. 8.5.4 Other Settings You can set the device white light brightness, IR light brightness, and video standard. Long tap on the initial page for 3 s and login the device home page. Tap Basic. Figure 8-11 Basic Settings Page White Light Brightness Set the supplement white light's brightness.
DS-K1F600U-D6E Series Enrollment Station User Manual 30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the Philippines, etc. 8.6 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes face anti-spoofing, liveness security level, pitch angle, yaw angle, pupillary distance, and WDR. Long tap on the initial page for 3 s and login the home page. Tap Biometric.
DS-K1F600U-D6E Series Enrollment Station User Manual Parameter Description Pupillary Distance The minimum resolution between two pupils when starting face recognition. The actual resolution should be larger than the configured value. By default, the resolution is 40. WDR It is suggested to enable the WDR function if installing the device outdoors.
DS-K1F600U-D6E Series Enrollment Station User Manual Note Make sure the edited file is saved in the corresponding folder named "DS-K1F600U-D6E", "DSK1F600U-D6E-F", or "DS-K1F600U-D6E-IF" in the root directory of the USB flash drive. 5. Tap Import User. Note Up to 2000 users can be imported. Result The system will read the user information in the USB flash drive automatically and import the data to the device. 8.7.2 Export Enrolled Data Export enrolled data from the device to the USB flash drive.
DS-K1F600U-D6E Series Enrollment Station User Manual 8.7.3 Clear Enrolled Data Delete all enrolled data in the device, including all face pictures, fingerprints, card, etc. Long tap on the initial page for 3 s and login the home page. Tap Data. Figure 8-15 Data Management Page Tap Clear Enrolled Data to delete all enrolled data in the device, including all face pictures, fingerprints, card, etc. 8.8 System Maintenance You can view the device system information and capacity.
DS-K1F600U-D6E Series Enrollment Station User Manual Capacity You can view the number of administrator, user, face picture, card, and event. Note • Parts of the device models support displaying the fingerprint number. Refers to the actual page for details. • The capacity varies according to the configured enrollment rules. For details about setting enrollment rules, see Set Enrollment Rule .
DS-K1F600U-D6E Series Enrollment Station User Manual Appendix A. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Expression • Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below. • Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. • Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed.
DS-K1F600U-D6E Series Enrollment Station User Manual Appendix B. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
DS-K1F600U-D6E Series Enrollment Station User Manual Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again.
DS-K1F600U-D6E Series Enrollment Station User Manual Appendix C. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure C-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands.
UD21520B-A
