Quick Start Guide

9
Connecting the Doorbell to an NVR
The DS-HD1 Doorbell can be connected to a Hikvision NVR for viewing and recording.
1. Open the NVR interface (i.e., Web, local, or iVMS-4200 client).1. Open the NVR interface (i.e., Web, local, or iVMS-4200 client).
2. Go to Camera 2. Go to Camera ManagementManagement..
NOTE: The Camera Management interface location varies by NVR model.
3. Click the Custom Add tab on the title bar to enter the Add IP Camera (Custom) interface.3. Click the Custom Add tab on the title bar to enter the Add IP Camera (Custom) interface.
Add IP Camera (Custom)
IP Camera Address
Protocol
Management Port
Transfer Protocol
User Name
Password
110.110.1.11
HIKVISION
8000
TCP
admin
********
Continue to Add Add
4. Enter the following information (4. Enter the following information (use the Hikvision SADP tool (available at www.hikvision.com) to find doorbell’s IP address):):
· IP Camera Address: [doorbell’s IP address]
· Protocol: HIKVISION
· Management Port: 8000
· Transfer Protocol: TCP
· User Name: admin
· Password: [verification code on doorbell label]
5. Click Add to finish adding the doorbell.5. Click Add to finish adding the doorbell.