Quick Start Guide

8
Use AP Mode for Wi-Fi Configuration
-For AP hotspot configuration, press the Reset button for 5seconds, and then you will hear a voice prompt.
-Wait for a few seconds, until you see the LED indicator flashing blue.
-Follow the voice prompt to connect Wi-Fi.
Wi-Fi Name: softap_XXXXXXXXX (9-digit Serial No.)
Default Password: softap_XXXXXX (Verification Code)
eg. Default Password: softap_ABCDEF
Serial No. and verification code are listed on the cover of this manual.
-Go back to the Hik-Connect app after successful connection. Tap Next.
-Search out the Wi-Fi you want the device to connect to, and enter password.
SD Card Management
1. 1. In the Hik-Connect app, tap the In the Hik-Connect app, tap the Storage StatusStorage Status in the Device Settings interface to check the SD card status. in the Device Settings interface to check the SD card status.
2. 2. If the card status displays as If the card status displays as UninitializedUninitialized, tap to initialize it. , tap to initialize it.
The status will then change to The status will then change to NormalNormal, and it can store videos and/or pictures., and it can store videos and/or pictures.