Quick Start Guide

6
8
Fix the doorbell to the mounting plate by inserting the
doorbell screws.
Doorbell Screw
9
Restore the electricity at the breaker.
• Doorbell is powered on when its indicator flashes blue quickly. If not, make sure your electricity is
off and check the wiring. If yes, proceed to doorbell setup.
• For the first time use, please power on the doorbell and wait for 3 hours before using it, or the chime
in your home may not work.
1
Add to the Hik-Connect app (v3.12.0+).
- - Connect your mobile phone to Wi-Fi.
- - Download and install the Hik-Connect app by scanning the QR Code below.
- - Open the Hik-Connect app and register a Hik-Connect user account following the start-up wizard, and log in.
- - On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code page.
Scan QR Code for Hik-Connect App Hik-Connect App
- - Scan the QR code on the device or the cover of this manual when the indicator flashes blue.
- - Follow the app wizard to finish Wi-Fi configuration.
If you want to change your doorbell’s Wi-Fi, press and hold the reset button for 5s and repeat this step.
Doorbell Setup