User's Manual

FocSign Lite Client User Manual
2
Chapter 2 Registration and Login
2.1 Registration
Purpose:
Registration is required for the first login.
Before you start:
Install the client on your computer.
Step 1 Run the client.
Step 2 Set the password and confirm it.
One client has only one user: admin.
Step 3 Click Register.
You will enter the interface of Port Settings.
Click OK if the message which requires you to disable the firewall appears.
Step 4 Select the desired NIC, and configure the IP address and port number.

You can select the desired network card for registration when there are multiple choices. If the
IP address of the selected network card changes, you will be prompted to change the IP
address.

If the client is not in the same subnet with the terminal, you need to enable port mapping and
configure related parameters.
Step 5 Click OK and return to the login interface.
Step 6 Optionally, check Remember Password and Auto Login according to needs.
2.2 Login
Purpose: