User's Manual

FocSign Lite Client User Manual
24
Figure 4-6 Add Schedule
Step 2 Select Configuration Mode: Day, Week, Custom.
Custom mode supports to play the program on specific period. Up to 90-day custom schedule
is supported.
Step 3 Select Time Interval.
Step 4 Select program in Program List, and drag in the schedule.
Step 5 Set the start time and end time.
Step 6 Click Release to enter the release interface.
4.2.2 Create Loop Schedule
Step 1 Go to Control Panel > Create Schedule.
Step 2 Set Configuration Mode as Loop.
Step 3 Drag the program into the play list.
Step 4 Click to add new list.

Up to 8 programs can be added to one play list.

Up to 8 loop play lists can be created.
Step 5 Play List 1 is no time-limited loop by default. Select time for the other loop play list.
 No Time- Limited Loop: The programs are played by order.
 Time- Limited Loop: Play the programs at specific period. The priority of Time- Limited Loop is
higher than the No Time- Limited Loop.
Step 6 Click Release to enter the release interface.