User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Registration and Login
- Chapter 3 Terminal Management
- Chapter 4 Program Management
- Chapter 5 System Management
FocSign Lite Client User Manual
11
Figure 3-5 Configure Channel Parameters
Step 4 Select a channel and click .
Step 5 Enter network camera parameters.
Step 6 Click Apply to link to the network camera.
Step 7 Optionally, click / to link the network camera to the other channel.
3.4 Terminal Maintenance
3.4.1 Upgrade
Purpose:
You are recommended to upgrade the terminal with the help of professional technical support.
Before you start
Save the upgrade file in your computer local path.
Step 1 Go to Terminal Management.
Step 2 Click Upgrade.
Step 3 Click and select the upgrade file path.
Step 4 Click OK to start upgrade.