User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Registration and Login
- Chapter 3 Terminal Management
- Chapter 4 Program Management
- Chapter 5 System Management
FocSign Lite Client User Manual
10
Step 5 Click Apply.
3.3.2 Configure Time Zone
Purpose:
Configure terminal time zone according to the actuality.
Step 1 Go to Terminal Management.
Step 2 Select the desired terminal and click Remote Settings.
Step 3 Go to Terminal Operation > Time Zone Settings.
Step 4 Select time zone.
Step 5 Click Apply.
3.3.3 Configure Logo
Purpose:
Enable/disable the startup logo of terminals.
Step 1 Go to Terminal Management.
Step 2 Select the desired terminal and click Remote Settings.
Step 3 Go to Terminal Operation > Logo Settings.
Step 4 Check/uncheck Enable Logo.
Step 5 Click Apply.
3.3.4 Configure IP Channel Linkage
Purpose:
Link the terminal with network cameras to receive information from network cameras.
Up to 8 network cameras can be added.
Step 1 Go to Terminal Management.
Step 2 Select the desired terminal and click Remote Settings.
Step 3 Go to Terminal Linkage > Channel Parameter Settings.