User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Registration and Login
- Chapter 3 Terminal Management
- Chapter 4 Program Management
- Chapter 5 System Management
FocSign Lite Client User Manual
6
Step 5 Set IP type, IP address, and server port.
Step 6 Enter terminal password.
Step 7 Click OK.
Step 8 Optionally, click Acquire Registration Status to view terminal registration status.
3.1.2 Add Terminal by IP Address
Step 1 Go to Terminal Management.
Step 2 Click Add Terminal.
Figure 3-2 Add Terminal
Step 3 Select Adding Mode as Add by IP.
Step 4 Enter Terminal IP Address and Port.
Step 5 Enter Terminal Name and Terminal Password.
Step 6 Click OK.
3.1.3 Add Terminal by Serial No.
Before you start
Get the Serial No. of the terminal in system settings on the device.
Step 1 Click Terminal Management.
Step 2 Click Add Terminal.
Step 3 Select Adding Mode.