User's Manual

FocSign Lite Client User Manual
4
Chapter 3 Terminal Management
3.1 Add Terminal
Purpose:
You can manage added terminals, including start up/shut down terminals, adjust terminal volume
and brightness, etc.
You can add terminal via the following methods:

Add terminals from the Online Terminal bar if the client and the terminals are in the same
network segment.

Add terminals by IP address.

Add terminals by serial number.
3.1.1 Add Terminal on the Same Network Segment
Activate Terminal
Purpose:
You can activate the terminal via client.
Before you start:
Ensure the terminal is on and is in the same network segment with the client.
Step 1 Go to Terminal Management.
Step 2 Click on the lower-right corner.
Step 3 Select the terminals to activate.
Step 4 Click Activate.