User Manual

Table Of Contents
Information Release System User Manual
52
Step 4 Optionally, check Apply in Batch and select terminals to configure with the same
parameters.
Step 5 Click Apply.
7.3.10 Configure Time Zone
Purpose:
Configure terminal time zone according to the actuality.
Step 1 Click Time Zone Configuration.
Figure 7-10
Step 2 Select Time Zone.
Step 3 Optionally, check Apply in Batch and select terminals to configure with the same
parameters.
Step 4 Click Apply.
7.3.11 Configure Terminal Security
Purpose:
You can remotely enable/disable terminal SADP function.
Step 1 Click Terminal Security.
Step 2 Check/uncheck Enable SADP as your desire.
Step 3 Optionally, check Apply in Batch and select terminals to configure with the same
parameters.
Step 4 Click Apply.
7.3.12 Check Additional Component Information
You can check the version information of the additional component and determine whether an
upgrade is needed.
7.3.13 Configure Terminal IP Address
Step 1 Go to Network > Terminal IP Address.