User Manual

Table Of Contents
Information Release System User Manual
50
Step 4 Optionally, check Apply in Batch and select terminals to configure with the same
parameters.
Step 5 Click Apply.
7.3.6 Configure Logo
Purpose:
Enable/disable the startup logo of terminals.
Step 1 Click the Logo tab.
Figure 7-6 Startup Logo
Step 2 Check/uncheck Logo.
Step 3 Optionally, check Apply in Batch and select terminals to configure with the same
parameters.
Step 4 Click Apply.
7.3.7 Configure Default Schedule
Purpose:
If you need to display a default video when no schedule is being played, enable default schedule
and designate default videos. Refer to 6.1 Add Schedule to designate default video.
Step 1 Click the Default Schedule tab.
Figure 7-7 Default Schedule
Step 2 Check Enable Default Schedule.
Step 3 Enter Schedule Name.
Step 4 Optionally, check Apply in Batch and select terminals to configure with the same
parameters.
Step 5 Click Apply.