User Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Remote Control Operations
- Chapter 3 Client Software Operation
- Chapter 4 Material Management
- Chapter 5 Program Management
- 5.1 Add Program
- 5.1.2 Configure Program Basic Settings
- 5.1.3 Manage Page
- 5.1.4 Create Picture Program
- 5.1.5 Create PDF Program
- 5.1.6 Create Document Program
- 5.1.7 Create Audio/Video/Live Video Program
- 5.1.8 Create Webpage Program
- 5.1.9 Create Clock Program
- 5.1.10 Create Weather Program
- 5.1.11 Create Countdown Program
- 5.1.12 Create Video Input Program
- 5.1.13 Create Pop-up Image Program
- 5.1.14 Create Queue Manager Program
- 5.1.15 Create Capture Program
- 5.1.16 Create Button Program
- 5.1.17 Create App Program
- 5.1.18 Hyperlink Feature for Android Touchscreen Program
- 5.2 Check Program
- 5.3 Modify Program
- 5.4 Delete Program
- 5.5 Preview Program
- 5.1 Add Program
- Chapter 6 Schedule Management
- Chapter 7 Terminal Management
- 7.1 Adding Terminal
- 7.2 Toolbar
- 7.3 Terminal Remote Configuration
- 7.3.1 Configure Timed Startup/Shutdown
- 7.3.2 Configure Timed Volume
- 7.3.3 Configure Device Input Port Switch
- 7.3.4 Configure Default Volume
- 7.3.5 Configure Backlight
- 7.3.6 Configure Logo
- 7.3.7 Configure Default Schedule
- 7.3.8 Configure Terminal Password
- 7.3.9 Configure Temperature Protection
- 7.3.10 Configure Time Zone
- 7.3.11 Configure Terminal Security
- 7.3.12 Check Additional Component Information
- 7.3.13 Configure Terminal IP Address
- 7.3.14 Configure Linked Server IP Address
- 7.3.15 Adding IP Channel
- 7.4 Modify Terminal
- 7.5 Delete Terminal
- Chapter 8 General Configuration
- Appendix A Operation Flow Chart
- Appendix B Deployment Diagram
- Appendix C Troubleshooting
Information Release System User Manual
48
Figure 7-3 Timed Startup/Shutdown
Step 2 Select Schedule Type as Daily Schedule or Weekly Schedule. We take the weekly schedule
as an example to describe the steps.
Step 3 Drag to draw blue bars in the days of a week. During the time the blue bar locates, the
terminal runs. In other duration, it powers off.
Step 4 Optional, check Apply in Batch and select terminals to configure with the same parameters.
Step 5 Click Apply.
7.3.2 Configure Timed Volume
Purpose:
Configure the timed volume schedule for terminal. The terminal volume varies according to
schedule.
Step 1 Click the Device Volume Switch tab.
Step 2 Configure the schedule. For detailed steps, you can refer to Configure Timed
Startup/Shutdown.
7.3.3 Configure Device Input Port Switch
Purpose:
Switch the terminal display image between HDMI input and content from information release
server.