User Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Remote Control Operations
- Chapter 3 Client Software Operation
- Chapter 4 Material Management
- Chapter 5 Program Management
- 5.1 Add Program
- 5.1.2 Configure Program Basic Settings
- 5.1.3 Manage Page
- 5.1.4 Create Picture Program
- 5.1.5 Create PDF Program
- 5.1.6 Create Document Program
- 5.1.7 Create Audio/Video/Live Video Program
- 5.1.8 Create Webpage Program
- 5.1.9 Create Clock Program
- 5.1.10 Create Weather Program
- 5.1.11 Create Countdown Program
- 5.1.12 Create Video Input Program
- 5.1.13 Create Pop-up Image Program
- 5.1.14 Create Queue Manager Program
- 5.1.15 Create Capture Program
- 5.1.16 Create Button Program
- 5.1.17 Create App Program
- 5.1.18 Hyperlink Feature for Android Touchscreen Program
- 5.2 Check Program
- 5.3 Modify Program
- 5.4 Delete Program
- 5.5 Preview Program
- 5.1 Add Program
- Chapter 6 Schedule Management
- Chapter 7 Terminal Management
- 7.1 Adding Terminal
- 7.2 Toolbar
- 7.3 Terminal Remote Configuration
- 7.3.1 Configure Timed Startup/Shutdown
- 7.3.2 Configure Timed Volume
- 7.3.3 Configure Device Input Port Switch
- 7.3.4 Configure Default Volume
- 7.3.5 Configure Backlight
- 7.3.6 Configure Logo
- 7.3.7 Configure Default Schedule
- 7.3.8 Configure Terminal Password
- 7.3.9 Configure Temperature Protection
- 7.3.10 Configure Time Zone
- 7.3.11 Configure Terminal Security
- 7.3.12 Check Additional Component Information
- 7.3.13 Configure Terminal IP Address
- 7.3.14 Configure Linked Server IP Address
- 7.3.15 Adding IP Channel
- 7.4 Modify Terminal
- 7.5 Delete Terminal
- Chapter 8 General Configuration
- Appendix A Operation Flow Chart
- Appendix B Deployment Diagram
- Appendix C Troubleshooting
Information Release System User Manual
41
Default Video: The default video will be played during no schedule period. Refer to Configure
Default Schedule to enable the function first.
Step 5 Select Share Property as Private or Public.
Public: The program is available for all users.
Private: The program is only available for current users.
Step 6 Select the organization the schedule belongs to. For details about creating organization,
refer to 8.1 Organization Resource.
Step 7 Click to select a program in Program List.
Step 8 Drag to draw a colored bar in the 24-hour time bar.
Step 9 Repeat step 7 to 8 to specify programs to play in other periods.
Not more than 8 periods can be set each day.
Step 10 Click Save.
6.2 Check Schedule
6.2.1 Auto Check
Purpose:
If you are a user with check permission, you can enable auto check when uploading schedules.
Before clicking when creating schedule, check the Auto Check. Then system will
automatically check the program.
6.2.2 Manual Check in Schedule List Tab
Step 1 Click the Schedule List tab in Schedule Management interface.
Step 2 Click to select schedule the Check Status of which is To be Approved.
Step 3 Click .
Step 4 Select check Result as Pass or Deny.
Step 5 Enter your check Comment.