User Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Remote Control Operations
- Chapter 3 Client Software Operation
- Chapter 4 Material Management
- Chapter 5 Program Management
- 5.1 Add Program
- 5.1.2 Configure Program Basic Settings
- 5.1.3 Manage Page
- 5.1.4 Create Picture Program
- 5.1.5 Create PDF Program
- 5.1.6 Create Document Program
- 5.1.7 Create Audio/Video/Live Video Program
- 5.1.8 Create Webpage Program
- 5.1.9 Create Clock Program
- 5.1.10 Create Weather Program
- 5.1.11 Create Countdown Program
- 5.1.12 Create Video Input Program
- 5.1.13 Create Pop-up Image Program
- 5.1.14 Create Queue Manager Program
- 5.1.15 Create Capture Program
- 5.1.16 Create Button Program
- 5.1.17 Create App Program
- 5.1.18 Hyperlink Feature for Android Touchscreen Program
- 5.2 Check Program
- 5.3 Modify Program
- 5.4 Delete Program
- 5.5 Preview Program
- 5.1 Add Program
- Chapter 6 Schedule Management
- Chapter 7 Terminal Management
- 7.1 Adding Terminal
- 7.2 Toolbar
- 7.3 Terminal Remote Configuration
- 7.3.1 Configure Timed Startup/Shutdown
- 7.3.2 Configure Timed Volume
- 7.3.3 Configure Device Input Port Switch
- 7.3.4 Configure Default Volume
- 7.3.5 Configure Backlight
- 7.3.6 Configure Logo
- 7.3.7 Configure Default Schedule
- 7.3.8 Configure Terminal Password
- 7.3.9 Configure Temperature Protection
- 7.3.10 Configure Time Zone
- 7.3.11 Configure Terminal Security
- 7.3.12 Check Additional Component Information
- 7.3.13 Configure Terminal IP Address
- 7.3.14 Configure Linked Server IP Address
- 7.3.15 Adding IP Channel
- 7.4 Modify Terminal
- 7.5 Delete Terminal
- Chapter 8 General Configuration
- Appendix A Operation Flow Chart
- Appendix B Deployment Diagram
- Appendix C Troubleshooting
Information Release System User Manual
28
Figure 5-11 Window Type List
Step 4 Click to select a window to edit in Window List.
Figure 5-12 Window Property
Step 5 Adjust window position by editing X and Y value. Adjust window size by editing Width and
Height value.
Step 6 To specify the material to show in the window, click and select materials.
Step 7 Select a material and configure its Duration.
Step 8 Click Save to save the program.
5.1.9 Create Clock Program
Step 1 Configure program basic settings. For details, refer to 5.1.2 Configure Program Basic
Settings.
Step 2 Configure page parameters and select the clock in window type list. For details, refer to 5.1.3
Manage Page. A page only allows one clock material.
Figure 5-13 Window Type List