User Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Remote Control Operations
- Chapter 3 Client Software Operation
- Chapter 4 Material Management
- Chapter 5 Program Management
- 5.1 Add Program
- 5.1.2 Configure Program Basic Settings
- 5.1.3 Manage Page
- 5.1.4 Create Picture Program
- 5.1.5 Create PDF Program
- 5.1.6 Create Document Program
- 5.1.7 Create Audio/Video/Live Video Program
- 5.1.8 Create Webpage Program
- 5.1.9 Create Clock Program
- 5.1.10 Create Weather Program
- 5.1.11 Create Countdown Program
- 5.1.12 Create Video Input Program
- 5.1.13 Create Pop-up Image Program
- 5.1.14 Create Queue Manager Program
- 5.1.15 Create Capture Program
- 5.1.16 Create Button Program
- 5.1.17 Create App Program
- 5.1.18 Hyperlink Feature for Android Touchscreen Program
- 5.2 Check Program
- 5.3 Modify Program
- 5.4 Delete Program
- 5.5 Preview Program
- 5.1 Add Program
- Chapter 6 Schedule Management
- Chapter 7 Terminal Management
- 7.1 Adding Terminal
- 7.2 Toolbar
- 7.3 Terminal Remote Configuration
- 7.3.1 Configure Timed Startup/Shutdown
- 7.3.2 Configure Timed Volume
- 7.3.3 Configure Device Input Port Switch
- 7.3.4 Configure Default Volume
- 7.3.5 Configure Backlight
- 7.3.6 Configure Logo
- 7.3.7 Configure Default Schedule
- 7.3.8 Configure Terminal Password
- 7.3.9 Configure Temperature Protection
- 7.3.10 Configure Time Zone
- 7.3.11 Configure Terminal Security
- 7.3.12 Check Additional Component Information
- 7.3.13 Configure Terminal IP Address
- 7.3.14 Configure Linked Server IP Address
- 7.3.15 Adding IP Channel
- 7.4 Modify Terminal
- 7.5 Delete Terminal
- Chapter 8 General Configuration
- Appendix A Operation Flow Chart
- Appendix B Deployment Diagram
- Appendix C Troubleshooting
Information Release System User Manual
16
Figure 4-1 Material Management
Step 2 Select materials to upload and click Open.
Step 3 Select materials and click Upload Material.
4.1.2 Add Dynamic Material
Purpose:
Dynamic materials include webpage, IP camera, stream media server, URL picture, and general.
Webpage: An URL address.
General data: Data from third-party platforms like queue management device and pop-up
image device. Supported formats for pop-up image: bmp, jpg, and png.
Step 1 Click Dynamic Materials.
Step 2 Select Material Type.
Figure 4-2 Create Dynamic Material
Material type: Webpage
1) Enter material Name, material URL, and material Description.