User Manual

• Device Name: View the device name, and rename the device by tapping Device Name.
• Input Source
Sengs: Tap Input Source Sengs to set the Startup Input Source and auto
channel switch.
• Startup/Shutdown
Sengs: Set Startup Mode, Scheduled Startup/Shutdown, and No-signal
Shutdown.
• Wakeup
Sengs: Set Wake from Serial Port, and Wake from Signal Source.
• HDMI Output
Sengs: Connect the monitor by HDMI interface to share the contents on the
interacve tablet interface. Tap Output Resoluon Sengs to set resoluon.
Note
The monitor connected to the interacve tablet need to support HDCP.
• USB Sengs: Follow Systems, Android and PC modes are available.
• Boot Animaon Sengs: Set the boot animaon when startup the tablet.
• Restore Factory Defaults: Once the device is restored to factory defaults, all the
conguraon
data is lost.
Warning
Be cauous to restore factory defaults.
6.8.1 Input Source Sengs
Select Advanced Sengs → Input Source Sengs .
• Tap Startup Input Source to set the startup channel Android by default.
• Check Auto Switch When
Connecng Signal Source, and the device detects and switches to the
signal channels automacally, when HDMI or VGA signals are input in working status.
• Tap Auto Switch When
Disconnecng Signal Source, and the device switches to the set channel
if the current signal is disconnected in working status.
6.8.2 Startup/Shutdown
Sengs
Select Advanced Sengs → Startup/Shutdown Sengs .
• Startup Mode: Standby When Powered on and Startup When Powered on are available to
select.
• Scheduled Startup/Shutdown: Set everyday startup and shutdown
me.
• No-signal Shutdown: The device will shut down without signal input in a period of me.
6.8.3 Wakeup
Sengs
Select Advanced Sengs → Wakeup Sengs .
Interacve Tablet User Manual
28